Fanuc Alarm 92: AXIS INTERLOCK ACTIVE Fanus Control Model: 16/18/21, 16i/18i/21i Alarm Description An axis motion command was specified while the interlock signal for that axis was active. Help the CNC Community: How Did You Fix It? If you have…
Fanuc Alarm 98: SERVO ALARM (OVERCURRENT) Fanus Control Model: 16/18/21, 16i/18i/21i Alarm Description An abnormal overcurrent condition occurred in the servo amplifier driving the motor. Help the CNC Community: How Did You Fix It? If you have encountered this Fanuc…
Fanuc Alarm 99: MDI EXEC NOT ALLOWED AFT.SEARCH Fanus Control Model: 16/18/21, 16i/18i/21i Alarm Description After completion of search in program restart, a move command is given with MDI. Move axis before a move command or don’t interrupt MDI operation.…
Fanuc Alarm 95: AXIS MOTION ERROR Fanus Control Model: 16/18/21, 16i/18i/21i Alarm Description An unexpected axis motion or position discrepancy was detected by the control system. Help the CNC Community: How Did You Fix It? If you have encountered this…
Fanuc Alarm 97: SERVO ALARM (OVERLOAD) Fanus Control Model: 16/18/21, 16i/18i/21i Alarm Description An electrical or mechanical overload was detected on the specified servo motor axis. Help the CNC Community: How Did You Fix It? If you have encountered this…
Fanuc Alarm 91: REFERENCE POSITION RETURN ERROR Fanus Control Model: 16/18/21, 16i/18i/21i Alarm Description An error occurred during manual or automatic reference position return. Help the CNC Community: How Did You Fix It? If you have encountered this Fanuc 91…
Fanuc Alarm 96: SERVO ALARM (AXIS DISCONNECTED) Fanus Control Model: 16/18/21, 16i/18i/21i Alarm Description The position detector or feedback cable for the specified axis is disconnected or broken. Help the CNC Community: How Did You Fix It? If you have…
Fanuc Alarm 93: OT ALARM (POSITIVE DIRECTION) Fanus Control Model: 16/18/21, 16i/18i/21i Alarm Description The tool or machine axis reached the hardware or software limit in the positive direction. Help the CNC Community: How Did You Fix It? If you…
Fanuc Alarm 94: OT ALARM (NEGATIVE DIRECTION) Fanus Control Model: 16/18/21, 16i/18i/21i Alarm Description The tool or machine axis reached the hardware or software limit in the negative direction. Help the CNC Community: How Did You Fix It? If you…
Fanuc Alarm 100: PARAMETER WRITE ENABLE Fanus Control Model: 16/18/21, 16i/18i/21i Alarm Description On the PARAMETER(SETTING) screen, PWE(parameter writing enabled) is set to 1. Set it to 0, then reset the system. Help the CNC Community: How Did You Fix…