Fanuc Alarm 80: MAXIMUM MACRO NESTING EXCEEDED Fanus Control Model: 16/18/21, 16i/18i/21i Alarm Description The macro nesting level exceeds the allowable limit. Modify the program. Help the CNC Community: How Did You Fix It? If you have encountered this Fanuc…
Fanuc Alarm 79: PROGRAM VERIFY ERROR Fanus Control Model: 16/18/21, 16i/18i/21i Alarm Description In memory or program collation, a program in memory does not match the program being verified. Help the CNC Community: How Did You Fix It? If you…
Fanuc Alarm 78: NUMBER NOT FOUND Fanus Control Model: 16/18/21, 16i/18i/21i Alarm Description A program number or a sequence number which was specified by address P in the block which includes an M98, M99, M65 or G66 was not found.…
Fanuc Alarm 77: SUB PROGRAM NESTING ERROR Fanus Control Model: 16/18/21, 16i/18i/21i Alarm Description The subprogram was called in five folds. Modify the program. Help the CNC Community: How Did You Fix It? If you have encountered this Fanuc 77…
Fanuc Alarm 76: ADDRESS P NOT DEFINED Fanus Control Model: 16/18/21, 16i/18i/21i Alarm Description Address P (program number) was not commanded in the block which includes an M98, G65, or G66 command. Modify the program. Help the CNC Community: How…
Fanuc Alarm 75: PROTECT Fanus Control Model: 16/18/21, 16i/18i/21i Alarm Description An attempt was made to register a program whose number was protected. Help the CNC Community: How Did You Fix It? If you have encountered this Fanuc 75 PROTECT…
Fanuc Alarm 74: ILLEGAL PROGRAM NUMBER Fanus Control Model: 16/18/21, 16i/18i/21i Alarm Description The program number is other than 1 to 9999. Modify the program number. Help the CNC Community: How Did You Fix It? If you have encountered this…
Fanuc Alarm 73: PROGRAM NUMBER ALREADY IN USE Fanus Control Model: 16/18/21, 16i/18i/21i Alarm Description The commanded program number has already been used. Change the program number or delete unnecessary programs and execute program registration again. Help the CNC Community:…
Fanuc Alarm 90: REFERENCE POSITION RETURN INCOMPLETE Fanus Control Model: 16/18/21, 16i/18i/21i Alarm Description The reference position return cannot be performed normally because the reference position return start point is too close. Help the CNC Community: How Did You Fix…
Fanuc Alarm 87: COMMUNICATION ERROR (PARITY) Fanus Control Model: 16/18/21, 16i/18i/21i Alarm Description A parity error occurred during serial communication interface data transfer. Help the CNC Community: How Did You Fix It? If you have encountered this Fanuc 87 COMMUNICATION…